Dustproof Dream Neon Light Oil Coating 420LED/M Neon LED Strip

Dust-Proof Tactile Oil Coating WS2811 420LED/M Long-run Digital Neon LED Strip

Product Information

Engineered for extended installations, this 24V COB WS2811 RGB strip delivers 420 LEDs/m with 10 addressable pixels/m, offering a balanced blend of visual smoothness and practical performance. Unlike standard strips, it supports single-end power feeding for a full 10 meters with zero voltage drop—drastically simplifying wiring for large-area projects. Fully encapsulated in IP67 silicone with a dust-repellent tactile coating, it withstands harsh outdoor conditions while the 3M 300LSE tape ensures effortless mounting.

Characteristics & Technology

Built for Reach, Not Compromise
The 420LED/m COB WS2811 strip is purpose-built for projects where distance matters. With 420 LEDs per meter and 10 independent pixels per meter, it produces a smooth, continuous glow that easily rivals standard dense strips—but without the usual power-injection headaches. This is the workhorse for facades, perimeter outlines, and long-span architectural accents.

One Plug, 10 Meters of Pure Brightness
The biggest headache with long LED runs is voltage drop, which forces installers to run extra wires and add mid-line amplifiers. This 24V strip eliminates that hassle entirely—single-end feeding delivers stable, consistent brightness across the entire 10-meter length. No flickering, no dimming tail, no complicated wiring diagrams. Just plug and span.

Weather-Ready Construction
Rated IP67 with a rugged silicone extrusion, this strip laughs off rain, dust, and humidity. We've also applied a specialized anti-static, dust-proof tactile oil coating that actively repels airborne particulates—keeping the surface clean without any oily film—so your installation stays professional-looking even after months outdoors.

Simple, Secure Mounting
The pre-applied 3M 300LSE tape is engineered for high-bond strength on most surfaces. Just peel, position, and press—no clips, no channels, no extra labor.

Technical Specifications

• Input Voltage: DC24V

• LED Density: 420 LEDs/m

• Pixel Density: 10 Pixels/m (individually addressable)

• IC Type: WS2811 

• Waterproof Rating: IP67 (Silicone Tube Extrusion)

• Adhesive Backing: 3M 300LSE (peel-and-stick)

• Max Run (Single-End Feed): 10 meters with zero voltage drop

• Surface Treatment: Dust-proof tactile oil coating (non-greasy)

Pictures

Installation Guide - FAQ

Q: How to control WS2811 Digital RGB LED Strip?

A: Our Digital RGBCCT Strip requires a compatible SPI controller or DMX decoder. Popular options include: - Arduino/Raspberry Pi: For DIY programming (FastLED, Adafruit NeoPixel libraries) - Madrix Software: Professional pixel mapping and show control - DMX512 Controller: Art-Net/sACN to SPI converters - WiFi/Bluetooth Controllers: SP107E, SP601E for smartphone control - Standalone Controllers: K-1000C, T-1000S for SD card playback

Q: What is the maximum run length without voltage drop?

A: - DC24V strips: Power injection every 5 meters recommended - For longer runs, inject power from both ends or every 5 meters

Q: Can I cut the Digital RGB Strip?

A: Yes! The strip has cut marks every group. Use sharp scissors along the copper pad lines. After cutting, solder wires to the pads or use solderless connectors.

Q: Is the Strip Waterproof?

IP67: Silicone waterproof silicone extrusion