720LED/M Smart Neon LED Strip RGB Silicone Extruded Seamless COB Neon Light

WS2811 720LED/M Smart RGB Silicone Extruded Seamless COB Neon Light

Product Information

This 24V COB WS2811 RGB Neon Pixel Strip features 720 LEDs/m with 20 pixels/m, delivering ultra-soft, seamless illumination with no dark spots. The IP67 silicone extrusion ensures full waterproof protection for outdoor use, while the 300LSE 3M backing tape allows instant peel-and-stick installation. A dust-proof tactile oil coating on the surface keeps dirt away without sticky residue—ideal for architectural, stage, and accent lighting projects.

Characteristics & Technology

Seamless & Bright Lighting
Engineered with advanced COB (Chip-On-Board) technology, this WS2811 RGB COB neon strip delivers 720 LEDs per meter and 20pcs addressable pixels per meter. The result is a continuous, uniform light line with zero dark zones—perfect for projects that demand high visual quality.

Built for Indoors & Outdoors
Rated IP67 with silicone extrusion, this strip is fully protected against water and dust, making it suitable for outdoor facades, signage, pathways, and wet environments. The surface is treated with a special dust-proof tactile oil coating, which effectively repels dust and fingerprints while staying non-greasy to the touch.

Installation Made Easy
Pre-applied 300LSE 3M adhesive tape allows for quick, secure mounting—simply peel off the liner and press onto any clean, dry surface. No extra brackets or clips required.

Technical Specifications

• Input Voltage: DC24V

• LED Density: 720 LEDs/m

• Pixel Density: 20 Pixels/m

• IC Type: WS2811 

• Waterproof Rating: IP67 (Silicone Extruded)

• Adhesive: 300LSE 3M Tape

• Surface Finish: Dust-Proof Tactile Oil Coating

Pictures

Installation Guide - FAQ

Q: How to control WS2811 Digital RGB LED Strip?

A: Our Digital RGBCCT Strip requires a compatible SPI controller or DMX decoder. Popular options include: - Arduino/Raspberry Pi: For DIY programming (FastLED, Adafruit NeoPixel libraries) - Madrix Software: Professional pixel mapping and show control - DMX512 Controller: Art-Net/sACN to SPI converters - WiFi/Bluetooth Controllers: SP107E, SP601E for smartphone control - Standalone Controllers: K-1000C, T-1000S for SD card playback

Q: What is the maximum run length without voltage drop?

A: - DC24V strips: Power injection every 5 meters recommended - For longer runs, inject power from both ends or every 5 meters

Q: Can I cut the Digital RGB Strip?

A: Yes! The strip has cut marks every group. Use sharp scissors along the copper pad lines. After cutting, solder wires to the pads or use solderless connectors.

Q: Is the Strip Waterproof?

IP67: Silicone waterproof silicone extrusion