576LED/M FCOB LED Strip 16Pixels/M WS2811 LED Strip DC12V

576LED/m 16Pixels/M  WS2811 DC12V COB LED Strip

Product Information

DC12V 576 LEDs/m COB LED Strip — 16 Pixels/m, 10mm White PCB, JST Connectors Both Ends
This DC12V addressable COB LED strip features 576 LEDs per meter on a clean 10mm white PCB, delivering 16 pixels per meter for smooth, dynamic RGB color effects. Built with advanced COB (Chip on Board) technology, it produces dot-free, uniform illumination with no visible hot spots or dark zones — no aluminum channels or diffuser covers required.

A standout feature is the pre-soldered JST connectors on both ends, enabling true plug-and-play installation without soldering or complex wiring. Simply connect to a compatible controller or power source and you're ready to go — saving significant time and labor on-site.
Operating at DC12V, the strip maintains stable brightness over longer runs with minimal voltage drop. The 3M self-adhesive backing allows for quick, direct mounting to clean surfaces, while the slim 10mm white PCB blends discreetly into most installations.

Ideal for commercial signage, architectural accent lighting, entertainment venues, retail displays, and smart home projects where ease of connection and professional COB output are essential.

Main Features:

Voltage: DC12V
LED Type: COB RGB
LEDs per Meter: 576
Pixels per Meter: 16
PCB Width: 10mm (White)
Control: Addressable (WS2811 Protocol)
Connectors: JST Pre-Soldered (Both Ends)
Cuttable: Every 62.5mm (1 pixel group)
Mounting: 3M Self-Adhesive Backing

Pictures

Installation Guide - FAQ

Q: How to control WS2811 Digital RGB LED Strip?

A: Our WS2811 Digital RGB LED Strip requires a compatible SPI controller or DMX decoder. Popular options include: - Arduino/Raspberry Pi: For DIY programming (FastLED, Adafruit NeoPixel libraries) - Madrix Software: Professional pixel mapping and show control - DMX512 Controller: Art-Net/sACN to SPI converters - WiFi/Bluetooth Controllers: SP107E, SP601E for smartphone control - Standalone Controllers: K-1000C, T-1000S for SD card playback

Q: What is the maximum run length without voltage drop?

A: - DC12V strips: Power injection every 5 meters recommended - For longer runs, inject power from both ends or every 5 meters

Q: Can I cut the Digital COB LED Strip?

A: Yes! The strip has cut marks every group. Use sharp scissors along the copper pad lines. After cutting, solder wires to the pads or use solderless connectors.

Q: Is the Strip Waterproof?

It can be IP20/IP65/IP67/IP68 waterproof

Q: What is the difference between Digital COB and SMD Pixel LED Strip?

A: Digital COB LED Strip:Seamless, continuous glow — no visible dots or hot spots, the light is uniform and soft.

    SMD Pixel LED Strip: Visible individual LEDs,even more dazzling.