Rohs Digital LED Chip 12mA RGB 3535 SMD SK6812 MINI LED DC5V
Rohs Digital LED Chip
,Digital LED Chip 12mA
,MINI chip led rgb 3535 SMD
DC5V Digital RGB LED Chip 3535SMD SK6812 MINI LED
The SK6812mini LED chip is a type of small size built-in IC digital RGB LED chip with 3535SMD,for it is smaller size which are widely applicated in the PCBA for the consumer electronics and esports products, as the keyboards, mouse, case fan, Bluetooth speaker, as well as smart wearables and control systems with below characteristics
Working voltage: 5V@12mA (OUT GRB);
Precautions for the application of the 12mA current version
1.When monochromatic light is lit, it can be used in 100% grayscale;
2.When illuminating the tricolor light,use 70% grayscale;
Typical view angle 50%:120deg
Lens color: translucent
Built-in reset circuit, power does not light
Grayscale adjustment:256 levels
Single-line zero code transmission protocol,can be infinite cascade;
The data transmission frequency can reach 800Kbps, and when the refresh speed is 30 frames per second, the cascade number is less than 1024 points. ;
MSL:5a
ESD level:2KV
RoHS and REACH-compliant



-
- In practical application circuits,to prevent instantaneous high voltage damage to the internal signal input and output pins of the IC
caused by live plugging and unplugging during testing,protective resistors should be connected in series at the signal input and
output terminals. In addition,in order to ensure more stable operation between IC chips,the decoupling capacitance between each
LED is essential;
Application 1:For flexible strips or hard PCB LED strips, the transmission distance between the LEDs is short. It is recommended
to connect the protective resistors in series at the signal input and output ends, that is, about 500 ohms for R1 and R2, subject to the
actual test signal data;
Application 2:Used for LED modules or special shaped products. The transmission distance between LEDs is much longer. Due to
different wire materials and transmission distances, the protective resistance of the signal line connected in series at both ends will
be slightly different; Based on actual usage:
- In practical application circuits,to prevent instantaneous high voltage damage to the internal signal input and output pins of the IC
-

The SK6812mini digital RGB LED is the SK6812 IC packaged with R,G,B color chips inside the 3535smd,it is smaller size and easier used for a lot of PCB application.